|
July 10, 2009
Double Points Race
Pit Gate Opens @ 6pm
Fan Gate Opens @ 7pm
Racing Starts @ 8pm |
Rookie Champ Rules |
-----------------------
-----------------------
-----------------------
-----------------------
-----------------------
-----------------------
 |
|
Rookie Champ (local class)
Age
8 to 12
Minimum
weight #300
Trophies and championship points will be awarded.
You
may compete with any stock 4-cycle up to 6.5 HP engine.
Drivers
-
Drivers
over 12 yrs and under 8 yrs may compete with track official
approval.
-
Must have
serviceable fire extinguisher in pit.
Frames
-
Any
production, custom-built or fun kart frames allowed. (Quarter Midget
cars OK)
-
Must be
made of steel. No aluminum or titanium material.
Suspension
-
Front and
rear suspension is allowed.
-
Only (1)
one shock/spring per wheel
Body
-
Bodies
are mandatory.
-
May
resemble any production or race type vehicle.
-
Fiberglass, aluminum, or steel bodies.
-
Wings
roof or front allowed. Top wing sides must stay within 3” from outer
most edge of kart No sharp edges. Top wing size 3’x3’x 16”
sideboard.
Bumpers & nerf bars
-
Front and
rear bumpers required of Max 1" O.D. tubing. Not to exceed outside
tread width of tires.
-
Bumpers
and Nerf bars must have rounded or capped ends. No sharp edges.
Roll
cage & seat belts
-
Minimum 4
pt roll cage mandatory. Roll cage must be securely welded or bolted
to frame.
-
Minimum
3" head clearance. No conduit cages
-
Cage must
be constructed of steel no smaller than 3/4" O.D.
-
Minimum
4-point seat belt. Aluminum racing seat is recommended.
-
Right
side cage net, right side helmet support or a helmet restraint is
mandatory.
Wheels and tires
-
Any wheel
or tire allowed.
-
Grooving
allowed.
Brakes
-
Must be
capable of stopping kart within a safe distance.
Drive train
-
Live axle
only
-
Chain
guards are required.
-
Centrifugal shoe, disc clutch or belt drives allowed.
-
No wet
type clutches allowed
Engine
-
Pure
Stock up to 6.5 hp 4 cycle engines only. Maximum 206cc plus
wear/repair.
-
No motorsports engines allowed.
Engines that are no longer manufactured are not allowed!
-
No engine
modifications including milling, decking, porting or polishing.
-
No
after-market racing parts allowed.
-
Stock Dia.
valves and springs any type of keepers.
-
Stock
camshaft lift, compression relief non-tech. (Tech will be at the
valves)
-
Stock
crankshaft, flywheel, crank gear, push rods, lifters, rockers, and
stock length connecting rod.
-
Stock
carburetors. No modifications allowed
-
Header
exhaust pipe with flanged end may be used.
-
Fuel
pump, air cleaner and ignition timing are non-tech
Fuel
-
Fuel is
restricted to gasoline only. Racing gasoline is acceptable. No
performance enhancements or additives allowed.
-
Serviceable fire extinguisher in pit is required.
DISCLAIMER Reflect
The rules and
or regulations set forth herein are designed for the orderly conduct of
racing events and to establish minimum acceptable requirements for such
events. The rules shall govern all entrants. NO EXPRESS OR IMPLIED
WARRANTY OF SAFETY SHALL RESULT FROM PUBLICATIONS OF OR COMPLIANCE WITH
THESE RULES AND OR REGULATIONS. They are intended as a guide for the
conduct of the sport and are in no way a guarantee against injury or
death to a participant, spectator, or official.
The race director shall be empowered to permit deviations from any of
the specifications, herein, or impose any further restriction, that in
his opinion do not alter the minimum acceptable requirements. NO
EXPRESSED OR IMPLIED WARRANTY OF SAFETY SHALL RESULT FROM SUCH
ALTERATION OF SPECIFICATIONS. Any interpretation or deviations of these
rules is left to the discretion of the officials. Their discretion is
final.
January 1, 2009
Texoma Motor Speedway
Wichita Falls, Texas |
